10 Healthy Habits To Use Ghost 2 Immobiliser Reviews

· 6 min read
10 Healthy Habits To Use Ghost 2 Immobiliser Reviews

Ghost 2 Immobiliser

Ghost is an electronic security system that wirelessly protects your car against key-cloning and hacking. It connects to the ECU unit via the CAN data network. It is silent and isn't recognized by thieves.

You can only disable it by entering the sequence of buttons (like PIN code) you have programmed into your car using buttons on the steering wheel and centre console.

Guard Your Car from Theft

Car theft is on the rise and vehicles are taken away in a matter of minutes. It is important that car owners think about the extra security measures they can take. Immobilisers are among the most effective and established methods to keep your car secure. Ghost immobilisers are a good option because they are small, hidden inside the wires of your vehicle, and don't emit radio frequency signals. They are therefore not traceable and can be fitted without affecting the CAN bus system in your vehicle.

The ghost immobiliser that we have installed near you can only be disarmed with the pin code that we created at the time of installation. This unique disarming sequence uses buttons on your steering wheel or doors to prevent anyone from driving away your car. This stops thieves from copying your key or using a jamming/spoofing device that can disable standard car immobilisers.

A ghost immobiliser will not just stop your vehicle from being driven but also stops it from being smashed to make parts.  ghost 2 immobiliser cost  is a growing problem in the UK due to the increasing popularity of these automobiles. It can happen in less than a minute. TTW ghost immobilisers can be easily programmed to shield vehicles from such attacks.


If you have our ghost 2 immobiliser in my area, it will stop your vehicle from being stolen at a service station or even if it is being driven by an employee while your car is on a lift at the garage. This is because the Ghost can be set to Service/Valet mode and will only allow a unique button sequence to be input by our customers, you.

If you would like to find out more about our ghost immobilisers, or need a free estimate, call us today. We're happy to assist you and give you peace of mind knowing your vehicle will be safe at all time.

There is no LED or key fob to give away its whereabouts

This car immobiliser that is not detectable integrates with your vehicle's CAN network to protect your vehicle from the most recent kind of car crime. Unlike other aftermarket CAN immobilisers, Ghost does not rely on key fobs or LED indicators for its operation. Instead, it utilizes buttons on the standard factory controls already in your vehicle, such as those on the steering wheel, door panels and the centre console. This means that a secret pin code is generated that must be entered prior to when your vehicle starts, making it completely undetectable to thieves.

The developers of the CAN-BUS immobiliser have also added extra high-security methods in to prevent the device from being compromised or bypassed. It also provides CAN-BUS blockage and a physical immobiliser cut, which means that even if your keys are stolen, the criminal will be unable to leave with your joy and pride.

It's easy to install the CAN BUS immobiliser in your vehicle and it only takes about 30 minutes. We will send a member of our team to your area to arrange the time and location that suits you. After your vehicle has been equipped, you will receive an identification number and security codes for your phone as well as the app to make it simple to use and ensure that you are always in control of your vehicle's security.

The system is available to most modern vehicles, but should you own a special or antique car, contact us to find out if it's compatible. The cost of installation and supply of The Ghost Immobiliser is APS449 and your car will be added to the International Security Register if fitted by one of our approved fitters. If you have any questions, please don't hesitate to get in touch with our helpful staff. We look forward hearing from you.

Easy To Set Up And Programming

Immobilisers are fitted to many modern vehicles to prevent theft or hot-wiring. Immobilisers are more effective than physical deterrents such as steering wheel locks and wheel clamps due to the fact that they are integrated into the vehicle.

The unit connects directly to the CAN data network in your vehicle. It stops it from starting until you enter a unique code. The unit is small and sealed, which means it can be installed anywhere within your vehicle without any additional wiring. It doesn't also emit a radio frequency signal so it cannot be detected by RF scanning or code grabbing devices used by thieves.

Ghost makes use of your vehicle's existing buttons on the steering wheel, door panels and centre console to create a customised disarm sequence (like a PIN code) that must be entered to authorise startup of your vehicle. The pin code sequence can be changed depending on the need and is dependent on four to twenty button presses. You can also put the vehicle in Service/Valet Mode so that it is still operable but it will not start or drive. This will ensure that your car is safe when you bring it in for valet parking or service and that the mechanic cannot access your pin code to disable your system.

If you're away from your vehicle for a long period of time, such as on a vacation or business trip You can use our app to obtain temporary pin. You can manually enter your pin while driving the vehicle.

Our CAN bus immobiliser can also be compatible with a remote keyfob and tracker. (Brand dependent) This will give priority to the ghost system. This is a great option for additional security in the case your vehicle is stolen, or if you lose your keys.

Contact us today to learn how we can protect your vehicle from key-cloning or hacking. We provide our services throughout the UK and also at our dedicated install center in Derby.

Service/Valet mode

Modern cars come with sophisticated stop/start eco systems that require right inputs to function properly for example, battery voltage, engine temperature, external temperatures and what electrical systems are active. These can sometimes cause problems and it can be difficult to determine if the issue is related to Ghost or not. This is particularly true if the vehicle has recently been cleaned or valet parked. If this is a problem you can switch to the ghost service mode allowing the vehicle to be driven and start up without the requirement for a pin code. This is helpful if your car is being maintained by an independent garage or valet-parked.

To enter service mode simply press the button for service 5 times. The indicator signal will flash twice when service mode is selected. It is possible to exit service mode at anytime by entering a PIN number. Once you exit the service mode then the Ghost immobiliser returns to normal operation.

It is a discrete system that communicates with the vehicle ECU through the CAN data circuit. It connects directly to the original buttons of the vehicle and does not rely on radio frequency signals, like other immobilisers. This makes it virtually impossible for any other device to hack or bypass or even jamming devices that spoof codes from the original key fob will do not affect this system.

It is an TASSA verified anti-theft system that is in compliance with the highest standards of protection. This includes a unique marking system that links to the security registry of the world, which is required by insurance companies.

The ghost immobiliser has a very small form factor and is easily hidden within the wiring of your vehicle's factory which makes it nearly impossible for thieves to locate. The sealed unit is so small that it can be positioned in many areas of the car, including under dashboards and on steering wheels.

The system utilizes buttons in your vehicle such as those found on the steering wheel, door panels or on the centre console to let you create a an unique and dynamic sequence of disarming that can be as long as 20 presses that must be completed to start your vehicle. It is able to be entered by anyone who has your pin code - it's safe and secure for you and your family, colleagues or friends to use.